another two batteries point

[Martin Kortmann]

Hi,

My notebook (Fujitsu/Siemens Celsius H230) has two Batteries.
The internal Batterie has 14.4V, 4.8 Ah. The secondary Batterie
(in the CD-Bay) has 10.8V and 3.8 Ah. This seems to be handled
OK, since your software only gets the "watts".

But: Where do you get the value of "watts_left"? The ACPI
batterie-info file doesnt show a remaining capacity in mW,
only present rate (in mA), remaining capacity (in mAh) and
present voltage (in mV).

Martin
-------------- next part --------------
==> CMB1/state <==
present:                 yes
capacity state:          ok
charging state:          discharging
present rate:            1748 mA
remaining capacity:      4800 mAh
present voltage:         15981 mV

==> CMB2/state <==
present:                 yes
capacity state:          critical
charging state:          discharging
present rate:            0 mA
remaining capacity:      0 mAh
present voltage:         0 mV