my Pentium M never go in C3 nor C4 modes...

[Stephen Bridges]

On Wednesday 06 June 2007 08:16:22 Arnaud Patard wrote:
> Evgeni Golov <sargentd at die-welt.net> writes:
>
> Hi,
>
> > On Fri, 1 Jun 2007 17:13:14 +0100 Stephen Bridges wrote:
> >> Ah, didn't realise there was a difference.  I think my laptop is ICH4
> >> rather than 4M, but I'd better check now.
> >
> > Your X31 should have an ICH4-M (so does mine...) ;)
> >

> Sorry for the delay, but I was busy on other things. The good news is
> that I'm now able to resume with the patch :)
> I've tested on 2.6.21 and 2.6.22rc4 on ICH4M chipsets. ICH5 owner should
> add their pci ids and report if it's working for them too.

I think my chipset must be a plain ICH4 on my Vaio S1HP as the kernel hangs 
when initialising the chipset (which it calls an ICH4).  I applied this 
against 2.6.22-rc3 with suspend2 and the powertop hpet patch.  It appeared to 
apply cleanly, but some already-applied patches were detected (no hunks 
failed).

Stephen.